UTP-CAT5E/Category 5e UTP Cable

Product Overview
Name: Category 5e Unshielded Twisted Pair UTP-CAT5E
Application: Suitable for 100Base-T, 1000Base-T and other Ethernet network connections, widely used in network wiring in homes, offices, schools and other places.
Structure and physical properties
Conductor:
Material: Bare copper conductor
Wire diameter: Single wire diameter is usually about 0.5mm, 24AWG
Insulation: HDPE (high-density polyethylene) insulation, insulation diameter is about 0.91±0.05mm
Wire pairs: 4 pairs of twisted pairs, core wire colors are white/orange, orange, white/green, green, white/blue, blue, white/brown, brown
Sheath: PVC or LSZH material, color is usually gray or blue, nominal outer diameter is about 5.0±0.2mm
Electrical characteristics
Characteristic impedance: 100Ω±15%, at 1-100MHz Frequency range
Conductor DC resistance (20℃): ≤9.380Ω/100m
Maximum loop resistance: 16.8Ω/100m
Maximum mutual capacitance: 560pF/100m
Maximum capacitance unbalance: 330pF/100m
Insulation resistance: ≥500MΩ
Transmission bandwidth: 100MHz
Transmission rate: supports up to 1Gbps
Attenuation: at 100MHz, attenuation ≤22dB/100m
Near-end crosstalk (NEXT): at 100MHz, NEXT≥35.3dB/100m
Equivalent far-end crosstalk (ELFEXT): at 100MHz, ELFEXT≥23.8dB/100m
Mechanical characteristics
Bending radius: the minimum bending radius during installation is not less than 4 times the outer diameter of the cable; the minimum bending radius during use is not less than 8 times the outer diameter of the cable times
Tensile force: During installation and use, avoid over-stretching the cable. It is generally recommended that the tensile force does not exceed 110N
Compressive strength: It can withstand a certain pressure and will not be damaged by squeezing under normal use conditions
Plug-in and unplug times: The plug-in and unplug times of the RJ45 plug are not less than 1000 times
Environmental characteristics
Working temperature: -20℃ to 60℃
Storage temperature: -40℃ to 70℃
Humidity: It can work normally in an environment with a relative humidity of 5% to 95%
Flame retardant grade: It complies with relevant standards such as CMX/CM/CMR and has certain flame retardant properties
Test standards
It complies with relevant standards such as TIA/EIA-568-B and ISO/IEC 11801.